Automatic  Pressure Control Switch(automatic restart after water shortage ) DSK-5C

Product Iamge




Product Technical Data

1) Rated voltage: 110v or  220v or 110v-220v wide range voltage
2) Max. current: 10A or 20A
3) Frequency: 50/60Hz
4) Max. power: ≤1.1kW
5) Joint screw:G 1"
6) Protection grade: IP65
7) Starting pressure available: 1.2bar or 1.5bar or 2.2bar
8) Application: device for automatic control of electric water pumps

The product can replace the complicated installations of automatic water pump e.g. pressure gauge, pressure switch, T-valve, check valve and pressure tank ). It has the features of stable performance, low maintenance and long life etc,. It will indicate the pump has started when the green light Power on lights up after connecting the power. When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light Failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure


Function

The product is designed especially for all control operation of automatic water pump. If the particular breakdowns occur, such as water failure, obstruction of the suction pipe etc, the product recognizes the breakdowns and the red lightFailurelights up, at the same a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing theRestartbutton. The controller can ensure a constant pressure for the water supplying system and thus reduce the water hammer effect inside pipeline during water delivering. The controller also possesses the features of reset after power failure. Its starting flow is about 36-60L/h and is convenient for home application.


FAQ

Q: Are you manufacturer or trading company?
A: We are professional manufacturer of Pressure/ Level/ Temperature transmitters,water pumps,inverters,press controlers,electronic switches etc. We provide high quality products with high competitive factory price.
 
Q: What's your quality control system?
A: We have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
 
Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing purpose is acceptable.
 
Q: Can we print our logo on the products? Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM&customization are welcomed.
 
Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales dpt will respond with your questions in 24hrs, remote instruction by PC network is always available.
 
Q: What is lead time of your product?
A: We are factory, our lead time is always within 10 working days for products without customization.

If you have any demand for inverter,pressure control switch and VFD water pump,welcome to contact me.

Mobile : +86 18969835576

Website :http://www.wasinex.com
 

Automatic  Pressure Control Switch(automatic restart after water shortage ) DSK-5C

Product Iamge




Product Technical Data

1) Rated voltage: 110v or  220v or 110v-220v wide range voltage
2) Max. current: 10A or 20A
3) Frequency: 50/60Hz
4) Max. power: ≤1.1kW
5) Joint screw:G 1"
6) Protection grade: IP65
7) Starting pressure available: 1.2bar or 1.5bar or 2.2bar
8) Application: device for automatic control of electric water pumps

The product can replace the complicated installations of automatic water pump e.g. pressure gauge, pressure switch, T-valve, check valve and pressure tank ). It has the features of stable performance, low maintenance and long life etc,. It will indicate the pump has started when the green light Power on lights up after connecting the power. When the yellow light Pump on lights up, it indicates the pump has been started. The pump continues to operate for a few minutes enabling the system to fill in the pipes and to reach the required pressure. If this lapse is insufficient, the red light Failure will light up. In this event, keep the Restart button pressed and wait, with a tap opened till the red light is off. Once released the button and closed the tap, the product will keep the pump at its maximum pressure


Function

The product is designed especially for all control operation of automatic water pump. If the particular breakdowns occur, such as water failure, obstruction of the suction pipe etc, the product recognizes the breakdowns and the red lightFailurelights up, at the same a stop signal is sent to the pump to prevent damages caused by its working in the absence of water. Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing theRestartbutton. The controller can ensure a constant pressure for the water supplying system and thus reduce the water hammer effect inside pipeline during water delivering. The controller also possesses the features of reset after power failure. Its starting flow is about 36-60L/h and is convenient for home application.


FAQ

Q: Are you manufacturer or trading company?
A: We are professional manufacturer of Pressure/ Level/ Temperature transmitters,water pumps,inverters,press controlers,electronic switches etc. We provide high quality products with high competitive factory price.
 
Q: What's your quality control system?
A: We have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
 
Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing purpose is acceptable.
 
Q: Can we print our logo on the products? Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM&customization are welcomed.
 
Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales dpt will respond with your questions in 24hrs, remote instruction by PC network is always available.
 
Q: What is lead time of your product?
A: We are factory, our lead time is always within 10 working days for products without customization.

If you have any demand for inverter,pressure control switch and VFD water pump,welcome to contact me.

Mobile : +86 18969835576

Website :http://www.wasinex.com