H07Z-U/H05Z-U Fire retardant cable LSOH Cable Construction:  H07Z-U/H05Z-U Fire retardant cable LSOH Cable Standards  H07Z-U/H05Z-U Fire retardant cable LSOH Cable Technical Character:  H07Z-U/H05Z-U Fire retardant cable LSOH Cable Construction:  H07Z-U/H05Z-U Fire retardant cable LSOH Cable Standards  H07Z-U/H05Z-U Fire retardant cable LSOH Cable Technical Character:
A 24V
Dc Motor Consistency is good, reliable performance, low malfunction, torque, motor no-load and load running more smoothly and the lowest in 50 decibels
Functions: 24V dc
motor rotor part of the armature iron core, armature, commutator and
other devices, 24V dc motor is suitable for most of the
electronic products, such as Electric curtains, car, sweeping robot, no hakaze fan, etc
Areas of application:
Method of use: the best stable in
horizontal plane, installed on the 24V dc motor output shaft
parts, cannot use a hammer to knock, knock prone to press into the 24V
dc motor drive, may cause damage to internal components, and cannot be
used in the case of blocked.
Operating
temperature range:
24V dc motor should be used at
a temperature of -10~60℃.
The figures stated
in the catalog specifications are based on use at ordinary room
temperature catalog specifications re based on use at ordinary room
temperature (approximately20~25℃.
If a 24V dc
motor is used outside the prescribed temperature range,the grease on
the gearhead area will become unable to function normally and the motor will
become unable to start.Depending on the temperature conditions ,it may be
possible to deal with them by changing the grease of the motor's parts.Please
feel free to consult with us about this.
Storage
temperature range:
24V dc motor should be stored
ta a temperature of -15~65℃.
In case of storage
outside this range,the grease on the gearhead area will become unable to
function normally and the motor will become unable to start.
Service life:
The longevity of
geared motors is greatly affected by the load conditions , the mode of
operation,the environment of use ,etc.Therefore,it is necessary to check the
conditions under which the product will actually be used .The following
conditions will have a negative effect on longevity.Please consult with us
should any of them apply.
â—Use with a load
that exceeds the rated torque
â—Frequent starting
â—Momentary reversals
of turning direction
â—Impact loads
â—Long-term
continuous operation
â—Forced turning
using the output shaft
â—Use in which the
permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive
,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage
that is nonstandard as regards the rated voltage
â—Use outside the
prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with
us about these or any other conditions of use that may apply,so that we can be
sure that you select the most appropriate model.
when it come to
volume production,we're a major player as well .each month,we rurn out
600000 units,all of which are compliant with the rohs directive.Have any
questions or special needed, please contact us, we have the engineer group and
best sales department to service to you Looking forward to your inquiry. Welcome
to our factory.
24V Dc Motor,24V Dc Micro Motor,24V Dc Electrical Motor,24V Micro Dc Motor Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com
Class 1 Solid copper conductors, LSOH Insulation
 H07Z-U/H05Z-U Fire retardant cable LSOH Cable ApplicationBS 7211,IEC60227, EN 50268 / IEC 61034 , EN 50267-2-2, IEC 60754-2, EN 50265-2-1, IEC 60332.1
Conductor:Solid Copper Conductor, class 1
Working voltage:300/500V (H05Z-U), 450/750v (H07Z-U)
Test Voltage:2000/2500V
Working Temperature:5-90º C
Bending Radiu:4 x overall diameter
Max. Conductor temperature: 90 º C
Short-circuit max. Conductor temperature:250°C
Insulation resistance: 10 MΩ x km
Cable Parameter:
No. of Cores x Nominal Cross Sectional Area
Nominal Thickness of Insulation
Nominal Overall Diameter
Nominal Weight
Minimum insulation resistance at 90 °C
No x mm²
mm
mm
kg/km
MΩ·km
H05Z-U
1 x 0.5
0.6
1.9-2.4
8
0.015
1 x 0.75
0.6
2.1-2.6
12
0.012
1 x 1
0.6
2.2-2.8
14
0.011
H07Z-U
1 x 1.5
0.7
2.6-3.3
20
0.011
1 x 2.5
0.8
3.2-4.0
30
0.01
1 x 4
0.8
3.6-4.6
45
0.0085
1 x 6
0.8
4.1-5.2
65
0.007
1 x 10
1
5.3-6.6
105
0.007
Class 1 Solid copper conductors, LSOH Insulation
 H07Z-U/H05Z-U Fire retardant cable LSOH Cable ApplicationBS 7211,IEC60227, EN 50268 / IEC 61034 , EN 50267-2-2, IEC 60754-2, EN 50265-2-1, IEC 60332.1
Conductor:Solid Copper Conductor, class 1
Working voltage:300/500V (H05Z-U), 450/750v (H07Z-U)
Test Voltage:2000/2500V
Working Temperature:5-90º C
Bending Radiu:4 x overall diameter
Max. Conductor temperature: 90 º C
Short-circuit max. Conductor temperature:250°C
Insulation resistance: 10 MΩ x km
Cable Parameter:
No. of Cores x Nominal Cross Sectional Area
Nominal Thickness of Insulation
Nominal Overall Diameter
Nominal Weight
Minimum insulation resistance at 90 °C
No x mm²
mm
mm
kg/km
MΩ·km
H05Z-U
1 x 0.5
0.6
1.9-2.4
8
0.015
1 x 0.75
0.6
2.1-2.6
12
0.012
1 x 1
0.6
2.2-2.8
14
0.011
H07Z-U
1 x 1.5
0.7
2.6-3.3
20
0.011
1 x 2.5
0.8
3.2-4.0
30
0.01
1 x 4
0.8
3.6-4.6
45
0.0085
1 x 6
0.8
4.1-5.2
65
0.007
1 x 10
1
5.3-6.6
105
0.007
H07z-U/H05z-U Fire Retardant Cable Lsoh Cable
Model NO.: H07Z-U/H05Z-U
Material Shape: Round Wire
Range of Application: Panel Wiring for Appliances
Certification: ISO9001, CE, CCC
Brand: Jl
Conductor Class: 5
Voltage: 300/500V,450/750V
Standard: BS En 50525-3-41 ,IEC 60227 En 50265-2-1
Trademark: JL
Transport Package: Plastic Reel, Paper Reel, Wooden Drum
Specification: 1.5-240 mm2
Origin: Jiangsu, China
HS Code: 8544492100
Model NO.: H07Z-U/H05Z-U
Material Shape: Round Wire
Range of Application: Panel Wiring for Appliances
Certification: ISO9001, CE, CCC
Brand: Jl
Conductor Class: 5
Voltage: 300/500V,450/750V
Standard: BS En 50525-3-41 ,IEC 60227 En 50265-2-1
Trademark: JL
Transport Package: Plastic Reel, Paper Reel, Wooden Drum
Specification: 1.5-240 mm2
Origin: Jiangsu, China
HS Code: 8544492100
These cables are designed for the internal wiring of switchboards and distributor boards with an alternating nominal voltage up to 1000 Volts or a direct voltage up to 750 volts. Generally install in pipes or ducts and internal wiring of appliances with maximum operating temperature of 90º C, and generally in areas (such as public and government buildings) where smoke and toxic fumes may cause a threat to life and equipment. The cables produce no corrosive gasses when burnt which is particularly important where electronic equipment is installed.
These cables are designed for the internal wiring of switchboards and distributor boards with an alternating nominal voltage up to 1000 Volts or a direct voltage up to 750 volts. Generally install in pipes or ducts and internal wiring of appliances with maximum operating temperature of 90º C, and generally in areas (such as public and government buildings) where smoke and toxic fumes may cause a threat to life and equipment. The cables produce no corrosive gasses when burnt which is particularly important where electronic equipment is installed.