Superfast Recovery Rectifier is the most popular use for diodes. Fast rectifiers convert alternating current (AC) to direct current (DC). They only allow one-way flow of electrons. Rectifiers have many uses and are often found serving as components of high-voltage direct current power transmission systems and DC power supplies. Fast rectifier diodes feature very low reverse recovery time, very low switching losses and low noise turn-off switching. Super Fast Rectifiers,Fast Recovery Rectifiers,Super Fast Recovery Rectifier,Ultra Fast Rectifier Diodes Changzhou Changyuan Electronic Co., Ltd. , https://www.changyuanelectronic.com
Data transmission standard: 480M/s.
Load current: 3A max.
Cable withstanding Voltage:Â 100VAC/DC min.
Voltage Drop: 0.3V max. for VBUS; 0.2V max. for GND
we accept customized products.Including custom customer Logo, wire material, length, current load etc.
***********************************************************************************************************
Question: what is voltage drop?
Answer: The voltage drop of the cable is the phenomenon that the voltage generated by the power is reduced after a distance of the cable transmission.The reason for the voltage drop is that the cable has resistance.
Question: what is the effect of the volage drop?
Answer:Â The smaller the volage drop, the larger the charging power.The intuitive performance is that the charging speed is faster under the same conditions.
Flexibility test
Test Equipment: Swing tester
Test conditions:±60°/3000cycles@45cycles per 1minute,Weight is 200g.Â
PRODUCT SPECIFICATION:
NO.
Item
Test ConditionÂ
Requirement
1
Insulation Resistance
Insert the wire connector electrical measuring machine
corresponding to the test fixture,Temperature:25ºC ,Relative
humidity:80%RH10MΩ(Min)
2
Cable Assembly
Voltage DropInsert the wire connector electrical measuring machine
corresponding to the test fixture,Temperature:25ºC ,Relative
humidity:80%RH250 mV max for GND and 400 mV
max for VBUS
3
Cable Conduction
impedanceInsert the wire connector electrical measuring machine
corresponding to the test fixture,Current 1mA,Temperature:25ºC
,Relative humidity:80%RH3Ω(Max)
4
Withstanding Voltage
Insert the wire connector electrical measuring machine
corresponding to the test fixture,electric voltage 100VAC/DC
Temperature:25ºC ,Relative humidity:80%RHNo Breakdown,No damage
5
Contact Resistance
Mate connectors,
Measure by dry circuit,20mV Max,100mATYPE C 40mΩ/UAB AM 30mΩ(Max)
Max change delta +10mΩ
6
Flexibility test
±90°/2000cycles@10cycles per 1minute,Weight is 200g
NO Electrical NG,NO damage
7
Load test
5kgf for axis force test
NO Electrical NG,NO damage
8
Mating/Un-mating Force test
TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min
NO Electrical NG,NO damage
9
Durability
TYPE C Mated and unmated connectors up to 10000 cycles at a
minimum rate of 200cycles per hours,mating force 5~20N ;
unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a
minimum rate of 200cycles per hours,mating force 35N Max;NO Electrical NG,NO damage
10
Humidity Test
Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be
conditioned at ambient room conditions for 96 hoursNO Electrical NG,NO damage
11
Salt mist spray
humidity:95-98%(R.H.);
Temperature:35±2ºC;time:24hours;
PHÂ Value:6.5-7.2.
5%salt solutionNO Electrical NG,NO damage
12
Thermal shock
Mate Cable together and perform the test as follows.
10 cycle of: A)-55ºC for 30 minutes;
B)+85ºC for 30 minutesNO Electrical NG,NO damage
13
Low temperature test
The cable is exposed to -40ºC atmosphere for 96 hours. After
testing it shall be left alone for 1 to 2 hours in room ambientNO Electrical NG,NO damage
14
Heat test
The cable is exposed to 85ºC atmosphere for 96 hours. After
testing it shall be left alone for 1 to 2 hours in room ambient.NO Electrical NG,NO damage
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
Â
USB2.0 AM TO TYPE C, Â Quick Charge Cable.
Data transmission standard: 480M/s.
Load current: 3A max.
Cable withstanding Voltage:Â 100VAC/DC min.
Voltage Drop: 0.3V max. for VBUS; 0.2V max. for GND
we accept customized products.Including custom customer Logo, wire material, length, current load etc.
***********************************************************************************************************
Question: what is voltage drop?
Answer: The voltage drop of the cable is the phenomenon that the voltage generated by the power is reduced after a distance of the cable transmission.The reason for the voltage drop is that the cable has resistance.
Question: what is the effect of the volage drop?
Answer:Â The smaller the volage drop, the larger the charging power.The intuitive performance is that the charging speed is faster under the same conditions.
Flexibility test
Test Equipment: Swing tester
Test conditions:±60°/3000cycles@45cycles per 1minute,Weight is 200g.Â
PRODUCT SPECIFICATION:
NO.
Item
Test ConditionÂ
Requirement
1
Insulation Resistance
Insert the wire connector electrical measuring machine
corresponding to the test fixture,Temperature:25ºC ,Relative
humidity:80%RH10MΩ(Min)
2
Cable Assembly
Voltage DropInsert the wire connector electrical measuring machine
corresponding to the test fixture,Temperature:25ºC ,Relative
humidity:80%RH250 mV max for GND and 400 mV
max for VBUS
3
Cable Conduction
impedanceInsert the wire connector electrical measuring machine
corresponding to the test fixture,Current 1mA,Temperature:25ºC
,Relative humidity:80%RH3Ω(Max)
4
Withstanding Voltage
Insert the wire connector electrical measuring machine
corresponding to the test fixture,electric voltage 100VAC/DC
Temperature:25ºC ,Relative humidity:80%RHNo Breakdown,No damage
5
Contact Resistance
Mate connectors,
Measure by dry circuit,20mV Max,100mATYPE C 40mΩ/UAB AM 30mΩ(Max)
Max change delta +10mΩ
6
Flexibility test
±90°/2000cycles@10cycles per 1minute,Weight is 200g
NO Electrical NG,NO damage
7
Load test
5kgf for axis force test
NO Electrical NG,NO damage
8
Mating/Un-mating Force test
TYPE C Nsertion force:5~20N Withdrawal force:8~20N; USB AM Nsertion force:35N Max Withdrawal force:10N Min
NO Electrical NG,NO damage
9
Durability
TYPE C Mated and unmated connectors up to 10000 cycles at a
minimum rate of 200cycles per hours,mating force 5~20N ;
unmating force 8~20N .  USB AM Mated and unmated connectors up to 3000 cycles at a
minimum rate of 200cycles per hours,mating force 35N Max;NO Electrical NG,NO damage
10
Humidity Test
Temperature:65±2ºC,Relative Humidity:90%,Duration:96 hours Upon completion of the test,specimens shall be
conditioned at ambient room conditions for 96 hoursNO Electrical NG,NO damage
11
Salt mist spray
humidity:95-98%(R.H.);
Temperature:35±2ºC;time:24hours;
PHÂ Value:6.5-7.2.
5%salt solutionNO Electrical NG,NO damage
12
Thermal shock
Mate Cable together and perform the test as follows.
10 cycle of: A)-55ºC for 30 minutes;
B)+85ºC for 30 minutesNO Electrical NG,NO damage
13
Low temperature test
The cable is exposed to -40ºC atmosphere for 96 hours. After
testing it shall be left alone for 1 to 2 hours in room ambientNO Electrical NG,NO damage
14
Heat test
The cable is exposed to 85ºC atmosphere for 96 hours. After
testing it shall be left alone for 1 to 2 hours in room ambient.NO Electrical NG,NO damage
PalConn Technology Overview
Company Found 2003
1400+ Employees.
PT is a leading global integrated interconnect  Â
components provider of : Â
-- Mobile Phone , IT, Consumer, Medical, Automotive Industrial, Customer made, etc. Â Â
USB 2 0&3 0&3 1 Type C .0&3.0&3.1 Type C, RJM, SATA HDMI Audio Jacks DC Jacks Battery , HDMI, Audio Jacks, DC Jacks, Battery,SD Card, WTB, Metal part, HDMI Cables. USB 3.1 Cables, USB 2.0 & 3.0
Cable, RCA Cables, DP Cables, AGV Cables, RJ Cables
Â
PalConn Technology Milestones
2003: Shenzhen Factory Founded.
2006: Â ISO 9001:2008 Certified.
2009: Â ISO 14001:2004 Certified.
2009: Taiwan sales Office Established.
2013: Guizhou Factory
2015: TS16949 Certified.
2016: ISO 13485 Certified.
2017:QC08000:2012 Certified.
2017: IPC Certified.
Â
Quick Charge Cable, Type C Cable, Current Rating~3A Max. Integral Tension Plug, L=1.0m, UL2725, TPE, Outside Diameter: 3.0mm, Type C Durability 10000 Cycles
Model NO.: USB-UB-001-213
Retractable: Not Scalable
Charging Function: Charging Function
IC Chip: Without IC Chip
Customized: Customized
Data Transmission Standard: 480m/S
Load Current: 3A Max.
Cable Withstanding Voltage: 100VAC/DC Min.
Safety Standards: UL2725
Cable Color: Apple White
Material: TPE Jacket
Od: 3.0±0.15mm
Trademark: Palconn or ODM
Transport Package: UPS, DHL, EMS, Sf-Express
Specification: L=1000mm; Current: 3A max.
Origin: China
Model NO.: USB-UB-001-213
Retractable: Not Scalable
Charging Function: Charging Function
IC Chip: Without IC Chip
Customized: Customized
Data Transmission Standard: 480m/S
Load Current: 3A Max.
Cable Withstanding Voltage: 100VAC/DC Min.
Safety Standards: UL2725
Cable Color: Apple White
Material: TPE Jacket
Od: 3.0±0.15mm
Trademark: Palconn or ODM
Transport Package: UPS, DHL, EMS, Sf-Express
Specification: L=1000mm; Current: 3A max.
Origin: China
USB2.0 AM TO TYPE C, Â Quick Charge Cable.