Heavy Copper PCB products are used extensively in power electronic devices and power supply systems. A growing trend in the PCB industry, this unique type of heavy copper PCB features a finished copper weight of more than 4oz (140μm), compared to the 1oz (35μm) or 2oz (0μm) copper weight generally found in those with a Standard PCB copper thickness.
The additional copper PCB thickness enables the board to conduct a higher current, achieve good thermal distribution and implement complex switches in a limited space. Other advantages include increased mechanical strength at connector sites, the ability to create a smaller product size by incorporating multiple weights on the same layer of circuitry and the ability to use exotic materials to their maximum capacity with minimal risk of circuit failure.
Heavy Copper PCB Manufacturing Capabilities Table
BentePCB is a highly skilled PCB manufacturer that can develop and produce a superior Thick Copper PCB product of the highest quality. We offer a Thick Copper Pcb manufacturing service that uses copper weights of up to 16oz (560μm). Check our capabilities in the following table:
Features
Capability
Quality Grade
Standard IPC 2
Number of Layers
1 - 6layers
Order Quantity
1pc - 10000+pcs
Build Time
2days - 5weeks
Material
FR-4 Standard Tg 140°C, FR4-High Tg 170°C
Board Thickness
0.8mm - 6.5mm
Max Outer Layer Copper Weight (Finished)
16oz
Max Inner Layer Copper Weight
6oz
Min Tracing/Spacing
For External layers:
Solder Mask Sides
As per the file
Solder Mask Color
Green, White, Blue, Black, Red, Yellow
Silkscreen Sides
As per the file
Silkscreen Color
White, Black, Yellow
Surface Finish
OSP
HASL - Hot Air Solder Leveling
Flash Gold (Soft Gold)
Gold Plated
Immersion Silver
Immersion Tin
Finished Copper PCBs of Superior Quality
BentePCB has a decade of experience in manufacturing and assembling high-performing standard and heavy copper PCB products that help our customers achieve their productivity and profitability goals. We make it a standard operating procedure to have our highly skilled engineers run design for manufactureon every circuit file, and address all questions and concerns before production. This helps to ensure the finished electronic boards meet your performance expectations. Our capable staff includes an in-house quality control department - we guarantee the quality of our Printed Circuit Boards.
(Note: To ensure we can fabricate your thick copper PCB correctly, it is important to take the greater width of traces and spacing between the traces caused by the increased copper weight into consideration.)
About Us:
BentePCB is a professional PCB manufacturing which is focus on double side, multilayer, HDI PCB , rigid PCB and Flexible PCB mass production. The company was established on 2011.
Why Us?
UL (E492586), ISO9001, ISO14001, TS16949, RoHS certified.
Certification(UL:E492586, TS16949, ISO14001, ISO9001,RoHS):
Factory Tour:
Exhibition:
We Took part in the famous exhibitions over the past years,and got highly appreciation from the top experts,as well as cooperated tightly with them.
Delivery:
BentePCB offers flexible shipping methods for our customers, you may choose from one of the methods below.
FAQ:
Q1: What does BentePCB need for a customized PCB order?
We don`t just sell PCBs .We sell sleep.
Heavy Copper PCB Heavy Copper PCB,Thick Copper Circuit Board,Heavy Copper Clad PCB,Thickness Heavy Copper PCB Shenzhen Bente Circuit Limited , http://www.bentegroup.com
Features:
It strips outer jacket of UTP and STP cable and CAT5 round telephone cable.
It strips RG59/6/11/7 coaxial cable.
It strips flat telephone cable.
It also has cable cutter function.
Light weight, compact, cost-effective stripper, simple to operate.
Â
Specifications:
Size:
125*72*24mm (L*W*H)
Net Weight:
62g (86g including blister packing)
Instructions:
1. Push the cassette out of the housing, push from the front of the cassette.
2. Cassette is reversible, one side is available for RG-59/6 and another side for RG-7/11.
3. For stripping coaxial cable:
  a. Insert the cable until it aligns with the cable guide.
  b. Insert your index finger into the stripper's finger ring, rotate the stripper by counter clockwise 3-5 times. The        cable insulation is cut while you are turning the stripper.
  c. Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.
  d. Stripping distance is designed for 6mm, for each dielectric and inner conduct.
4. For stripping round networking cable:
  a. Insert the cable into the second stripping hole, rotate 1-3 times at counter clockwise, and then open the jaw and     remove the outer jacket.
  b. The black color adjusting knob is for adjusting the blade's depth. Turn clockwise for increasing the blade's         depth and counter clockwise for reducing the depth.
5. For cutting coaxial cable, round networking cable or flat telephone cable, place the cable in the position and then squeeze the handles.
6. For stripping flat cable, insert the cable between the stripper blades. Squeeze handles. Cable must be kept perpendicular and then pull from the tool.
  a. Insert 4P/6P cable into the two-bladed side of the tool's stripper until it touches the Stop guide.
  b. Insert 8P cable into the two bladed side of the tool's stripper and let it extend a little past the lower cut blade.
Features:
It strips outer jacket of UTP and STP cable and CAT5 round telephone cable.
It strips RG59/6/11/7 coaxial cable.
It strips flat telephone cable.
It also has cable cutter function.
Light weight, compact, cost-effective stripper, simple to operate.
Â
Specifications:
Size:
125*72*24mm (L*W*H)
Net Weight:
62g (86g including blister packing)
Instructions:
1. Push the cassette out of the housing, push from the front of the cassette.
2. Cassette is reversible, one side is available for RG-59/6 and another side for RG-7/11.
3. For stripping coaxial cable:
  a. Insert the cable until it aligns with the cable guide.
  b. Insert your index finger into the stripper's finger ring, rotate the stripper by counter clockwise 3-5 times. The        cable insulation is cut while you are turning the stripper.
  c. Open the jaws and remove the cable. Pull away the outer jacket and dielectric to expose the inner conductor.
  d. Stripping distance is designed for 6mm, for each dielectric and inner conduct.
4. For stripping round networking cable:
  a. Insert the cable into the second stripping hole, rotate 1-3 times at counter clockwise, and then open the jaw and     remove the outer jacket.
  b. The black color adjusting knob is for adjusting the blade's depth. Turn clockwise for increasing the blade's         depth and counter clockwise for reducing the depth.
5. For cutting coaxial cable, round networking cable or flat telephone cable, place the cable in the position and then squeeze the handles.
6. For stripping flat cable, insert the cable between the stripper blades. Squeeze handles. Cable must be kept perpendicular and then pull from the tool.
  a. Insert 4P/6P cable into the two-bladed side of the tool's stripper until it touches the Stop guide.
  b. Insert 8P cable into the two bladed side of the tool's stripper and let it extend a little past the lower cut blade.
Heavy Copper Pcb
4oz Cu 8mil/12mil
5oz Cu 10mil/14mil
6oz Cu 12mil/16mil
12oz Cu 20mil/32mil
16oz Cu 32mil/40mil
For Internal layers:
4oz Cu 8mil/12mil
5oz Cu 10mil/14mil
6oz Cu 12mil/16mil
Lead Free HASL
ENIG - Electroless Nickle/Immersion Gold
We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Jiangxi is for big volumn.
Turnover USD 10-50 million per year.
15,000 sqm area, 450 staff .
Mass Production from single to 16 layers.
Special Material:ROGERS, Arlon, Taconic.etc.
Client:Huawei, SAMSUNG, Malata, Midea,Texas Instruments.etc.
A: The customers need to provide Gerber or pcb file.If you do not have the file in the correct format, you can send all the details related to the products.
Q2: What is your quotation policy?
A: For the PCB order in large quantity, BentePCB will send you the quotation based on the MOQ of the products concerned, and the price will be reasonable with good quality.
Q3: How long will you send us quotation ?
A: After all files were sent, 2 to 8 hours as per your file.
Q4:What is your minimum order quantity?
A:Our MOQ is 1 PCS.
Q5: How about the service BentePCB offered to the customers?
A: If you have any questions about our products or company, do not hesitate to send us your inquiry toour customer service representatives, Your satisfaction is our pursuits.
Terminal Crimping Tools, Wire Stripper Tools
Model NO.: FLT-049A
Trademark: Customized
Origin: China
HS Code: 851770900
Model NO.: FLT-049A
Trademark: Customized
Origin: China
HS Code: 851770900