1, LED color difference problem There is basically no chromatic aberration problem in the application of a single LED, but if a large number of LEDs are put into use together or one lamp has multiple LEDs at the same time, the chromatic aberration problem is highlighted. Let me talk about a group of lamps. If you can see at a glance that the colors of the lights are inconsistent, I would like to make a discount when I want to have a good mood. Although LEDs are divided into eight military regions by color temperature like LUXEON, and then divided into several cells in each military region, a large range of chromatic aberrations are controlled to a certain extent, but there are still differences in the same batch of LEDs in the same color region. And this difference still can't escape the provocation of the naked eye. 2, LED insulation problem (Insulation refers to the heat-dissipating substrate for the positive and negative electrodes of the LED) We dare not say that we are the first to find the insulation problem of LED, but at least the big-name manufacturers are surprised by our doubts. Up to now, the fundamental problem has not been solved, but only to take remedial measures, such as the use of aluminum substrates to deal with insulation (the original aluminum substrate is not insulated, almost now done) may be incomprehensible. A single LED is not insulated, has little effect, and there are problems when multiple series are connected. 3, LED anti-pulse problem This problem is still controversial with the manufacturer. It does exist in my practical application. The main reaction is on the cold pulse, that is, at the moment of power-on, a few LEDs are broken or broken at the moment of cold power-on. I don't think it's caused by static electricity or high voltage (the starting voltage is in range). 4, the problem of LED illumination angle Since the LED lens packages of different manufacturers are different, even if they are the same illumination angle (nominal angle), the effect is not the same, making the selection of the concentrator difficult and difficult to use. 5, LED potential blinding hidden dangers The LED light-emitting point is too concentrated to make the center point super bright, which is easy to hurt people's eyes. Although some lighting manufacturers are making efforts in this regard, due to the lag of regulations, it can only be a moral issue for people. 6, LED fever problem In theory, LEDs don't heat very much, but because of the immature technology, LED fever is well known, I don't want to say more. 7, LED efficiency is low (luminosity) At present, the LED's electrical conversion efficiency is too low (due to the lack of instrument testing, dare not give specific data). 8, LED brightness is insufficient Insufficient brightness makes LEDs only play a supporting role in the lighting industry, mainly for decoration. At present, the LED light decay and lifespan problems produced by mainland or Taiwanese companies are more serious. First, the big-name manufacturers such as LUXEON have a nominal 100,000 hours. I am afraid that they are only psychologically clear, and the heat dissipation is good or bad. Matching can affect the light decay and life of the LED, so 100,000 hours is just a selling point! 10, LED drive power problem At present, most of the drive lines are borrowed from the switching power supply. Of course, there are also very small numbers of lines that are specifically used for LED driving, but the effect is basically the same. Since the LEDs need to be driven by DC, constant current control is adopted, which makes the driving lines quite large. Can not be compared with the electronic transformer, and the efficiency is relatively low, reaching 80% is not bad (single can not reach). In addition, in order to pursue applicability, the manufacturer claims that a driver can take ten or so casually (one, two can be). In fact, this is a misunderstanding. Although it is a constant current, the initial voltage is too high. Let death die in an instant. 11, limited LED shape Due to the characteristics of LED single-sided illumination, the shape of LED lamps is limited. 12, LED unit price is too high An imported 1W-3WLED is about 3 US dollars, and more than 10 pieces of domestically produced (poor quality, no intellectual property rights). A 6-LED or so lamp is sold to consumers, almost 1000 yuan, Do you want to buy a color TV or buy a lamp? [Edit: Vessel]
The latest Windows has multiple versions, including Basic, Home, and Ultimate. Windows has developed from a simple GUI to a typical operating system with its own file format and drivers, and has actually become the most user-friendly operating system. Windows has added the Multiple Desktops feature. This function allows users to use multiple desktop environments under the same operating system, that is, users can switch between different desktop environments according to their needs. It can be said that on the tablet platform, the Windows operating system has a good foundation.
Windows Tablet,New Windows Tablet,Tablet Windows Jingjiang Gisen Technology Co.,Ltd , https://www.gisentech.com
9, LED light decay and life