Shaoxing Haoda Electrical Appliance Co.,Ltd , https://www.zjhaoda.com
And this Wyatt box was originally built-in wifi connection, was shielded by Unicom can only use a network cable to connect the light cat. Online search for some tutorials, steps are always unsuccessful, then find Taobao, price 1 yuan, actually 40 yuan, and finally decided to test their own crack, and finally succeeded, after the crack to achieve: wifi connection does not require network cable can see IPTV, Android programs can be installed. Write down the steps to share.
The
1. Crack the required file link:
http://pan.baidu.com/s/1kTuBnkN
Password: gt1q
After downloading, unzip it and release it to the root directory of the U disk (you can see the rootv9a.sh, Alpha_script.sh, and root directories by opening the U disk) and insert the USB stick into the USB port on the USB port on the side of the USB port, near the front panel. Put putty.exe to any directory on your computer. 
2. Prepare a computer to connect to the router (do not distinguish between wired and wireless connection, but need to be in the same router as Wyatt)
3. Open the box and TV, enter my device, click on "Settings" - "More", select "Advanced Settings", this time will be required to enter the operation code "10010", then "OK", then Click "Equipment Test", enter the password "131022", "restart the interface into the color bar, find a computer with the switch, set the ip to 172.16.20.2,
4. Open putty, then execute telnet 172.16.20.14 After entering, you will see the prompt "root@rk312x:/"
Execute one by one (one command per line, pay attention to the space)
The following command is three lines do not go wrong. Can be directly copied in the command line window, click the right mouse button to paste, try not to play.
Mkdir -p /tmp/udisk
Mount -t vfat /dev/block/sda1 /tmp/udisk
/tmp/udisk/rootv9a.sh
Then wait for the last line to show done. The power button shuts down and unplugs the USB flash drive.
5. Wish box with on switch at the same time while the remote control at Wyatt box, keep pressing the "remote control" of the "standby" button (upper right button), about half a minute later, enter REC:: "1. "Apply update from external storage" page, select "6 reboot" restart on it. After restarting, there is root and RE manager and sofa butler. 
6 in the sofa butler inside open settings, wifi, connect the cat's wifi wireless can watch IPTV (pay attention to the secondary router can not see the IPTV), my wireless occasionally see IPTV when the card is not as good as the cable effect, but To avoid throwing off the line, it is more convenient, with a sofa housekeeper, would like to install software on the safety software.
Beijing Unicom custom TV box: Huawei Wyatt EC6108V9A detailed crack tutorial
Unicom broadband was installed for three months. Unicom called to send a set-top box. To the personnel installation, it was only possible to use a network cable to connect, and only the Unicom program in the box could not install other programs. It was very unhappy.
For more information, please visit our website (http://bbs.shafa.com/forum-51-1.html). If the problem is not resolved, you can join the official butler of the sofa butler. : 414037480, by the moderator to help you solve the puzzle!