Although I haven't read the book for a long time, the desk lamp is still there. Some time ago, I saw foreign netizens making a lamp with a sense of design. I wanted to share his production experience. He made a spiral table lamp. The desk lamp is mainly composed of wooden pins, each of which is about 7cm (2.75 inches) in length and 5mm (0.19 inches) in diameter. Therefore, the table lamp made this time is very small. Of course, if you want to make the size bigger, you need a bigger one. Wooden pin. If there is no wooden pin at hand, you can replace it with a cardboard tube. See the second step for the specific production process. In short, it is recommended to use LED tubes, at least energy-saving lamps, especially cold light. The first step: the required equipment 124 wood pins - (can be bought on a treasure) Hot melt adhesive cardboard ruler pencil Light bulb and lamp holder The hot melt is chosen because it does work very quickly. If you want the desk lamp to have better insulation, it will be better with white glue. Step 2: Assembling the wooden pin As shown in the figure, four wooden pins are used to form a square, and each wooden pin forms an edge. Since the ends of the wood pin are round: the sol method of the above figure is used. By analogy, 31 squares of the same size were made.
Professional LED screen solutions, suitable for indoor and outdoor advertising display, concerts, parties, event, wedding, conference halls, meeting room etc.
As a professional manufacturer with 15 years experience, we are committed to producing high-quality products and providing professional and applicable LED display installation solutions. In addition, our company has long-term cooperation with well-known brand accessories suppliers, such as: King Light, Nova Star, G-energy, etc., We guarantee that the accessories used are genuine.
Led Screen,Led Display,Led Video Wall,Led Display Board Guangzhou Cheng Wen Photoelectric Technology Co., Ltd. , https://www.nbcwdisplay.com
