High Voltage Capacitor Charging Power Supplies High Voltage Capacitor Charging is a mainstream application of high-current high-voltage power supplies. The High-voltage Capacitor Charging power supplies are a kind of high-voltage DC Power Supplies specially designed to meet the requirements of capacitor charging or capacitor conditioning. HV Capacitor Charging Power Supplies, High-voltage Capacitor Charging Power Supplies, Capacitor Charging High Voltage Power Supplies, Capacitor Charging HVPS, HV Capacitor Charger Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com
The TV digital set-top box sharing device we talked about is actually similar to a typical TV set-top box, but there is a certain difference. This kind of sharing device can allow different rooms to watch the same channel of digital TV without using a set-top box at the same time. If you want to see different channels, you can decrypt it and you can read it.
1. Connect the limited TV subscriber line to a dedicated distributor.
2. Replace the ordinary cable TV subscriber box with a dedicated subscriber box.
3, according to the instructions written on the AV cable, cable TV and other devices and make the correct link.
4, a good link can boot detection, under normal circumstances can be implemented remote control operation.
1. Place the top of the set-top box before launch and correspond to the position accepted by the remote control so that the panel is aligned to the same place.
2, using the IR extension cable included with the product, this method is suitable for the case where the set-top box and the host are not together, use a 3.5mm line inserted behind the transmitter, the other head of the purple transmitter is glued to the set-top box remote controller to accept The location also enables remote set top boxes at the receiving end.
3. Place the transmitter and set-top box face to face. It also enables remote control of set-top boxes.
1. Applicable to companies with more TV sets such as hotels, hospitals, saunas, large restaurants, rental houses, and factory dormitories.
2. One device can modulate 4 set-top boxes into 4 channels, and 40 sets-top boxes + 10 sets of T8004 output 40 channels to each room on the floor.
3, the equipment is simple to install, do not re-wiring and change the original line, set-top boxes concentrated in the engine room, convenient hotel management, not easily stolen.
4. Applicable to hotels that need to increase satellite channels, allowing all rooms to watch satellite programs such as: Phoenix TV, European football, etc.
5, can be self-hosted channels, such as hotel hospitals to play their own ads, school-run teaching channels, song and dance halls, restaurants wedding live broadcast.
1, the price is more affordable.
2. The installation does not require rewiring and will not destroy the existing decoration style.
At present, iDealTek-Electronics' high-voltage capacitor charging power supplies are IGBT-based switching mode High Voltage Power Supplies. Compared with the traditional linear high-voltage power supplies, the switched-type capacitor charging high-voltage power supplies are featured for higher power density, higher efficiency, higher output response speed and faster protection start and self-recovery speed.
iDealTek-Electronics originally produced linear capacitor charging high-voltage power supplies. Based on years of experience in the capacitor industry, our current capacitor charging high voltage power supplies use 19-inch standard racks, 4U and 6U chassis, which facilitate the installation of integrated capacitor charging systems. The output power ranges from 2KW to 10KW with output voltage levels at 5KV / 10KV / 20KV / 30KV / 35KV / 40KV / 50KV / 60KV / 100KV with a complete protection function, which can deal with overvoltage, overcurrent, load discharge and other situations.
The output voltage and current of the power supply can be controlled and read through the front operation panel of the power supply. And, this series of high voltage capacitor charging power supplies are also equipped with RS485 / DB15 / DB50 interfaces as standard. Customers can edit the control software according to our communication protocol or apply 0-10V signals and dry contact signals on the interface according to the definition of the analog interface to achieve full control and monitoring of the power supply, such as high voltage start/stop, output settings and readings.
How does a digital TV set-top box connect multiple TVs?
The popularity of digital television also allows digital TV set-top boxes to enter millions of households. However, some homes have more than one digital TV. What is the problem if the set-top boxes are not enough? Buying one is too wasteful. At this time, digital TV set top box sharers appeared, which solved this problem very well.
Introduction of TV Digital Set-top Box Sharer
Preparation for installation of TV digital set top box sharer
The installation of a TV set-top box sharer must be fully prepared. In the general store, this product is sold as a complete set, including: the main controller, dedicated distributor, dedicated user box, infrared receiver, etc., priced at more than 100 yuan, there are higher prices, to see What features do you want? Installation of TV Digital STB Sharer
TV set top box sharer use method
Digital TV set-top box sharer application scope
Digital TV set-top box sharer advantages