LED Switchbox Lightbar Controller (TA-7)

July 03, 2023

Model NO.: TA-7 light bar controller
Voltage: 12V/24V DC
Trademark: Golddeer
Specification: ISO9001: 2008
Origin: China
Model NO.: TA-7 light bar controller
Voltage: 12V/24V DC
Trademark: Golddeer
Specification: ISO9001: 2008
Origin: China
TA-7 light bar controller:

POWER SWITCH: On /off of all modules, pattern memoried.

FRONT LIGHT SWITCH: On/off of the front modules with alley lights (when the alley lights be in off)

REAR LIGHT SWITCH: On/off of the rear modules

ALLEY LIGHT SWITCH: On/off of the alley light, supported steady burn, flashing synchronous, flashing synchronous.

TAKE DOWN SWITCH: On/off of the take down lights, supported steady burn, flashing synchronous, flashing synchronous.

FLASH PATTERN SWITCH: Pressed to enter next flashing pattern.

TRAFFIC ADVISOR SWITCH: On/off of the traffic advisor, pressed to enter directional pattern, support left, in-out, right.



LED Switchbox Lightbar Controller (TA-7)

LED Switchbox Lightbar Controller (TA-7)

-------------------------------------
Model:  TA-7                                               
Type   light controller
Voltage   12V or 24V
TA-7 light bar controller:

POWER SWITCH: On /off of all modules, pattern memoried.

FRONT LIGHT SWITCH: On/off of the front modules with alley lights (when the alley lights be in off)

REAR LIGHT SWITCH: On/off of the rear modules

ALLEY LIGHT SWITCH: On/off of the alley light, supported steady burn, flashing synchronous, flashing synchronous.

TAKE DOWN SWITCH: On/off of the take down lights, supported steady burn, flashing synchronous, flashing synchronous.

FLASH PATTERN SWITCH: Pressed to enter next flashing pattern.

TRAFFIC ADVISOR SWITCH: On/off of the traffic advisor, pressed to enter directional pattern, support left, in-out, right.



LED Switchbox Lightbar Controller (TA-7)

LED Switchbox Lightbar Controller (TA-7)

-------------------------------------
Model:  TA-7                                               
Type   light controller
Voltage   12V or 24V

Bridge Rectifier

Rectifier bridge is to seal the rectifier tube in a shell. Points full bridge and half bridge. The full bridge connects the four diodes of the connected bridge rectifier circuit together. The half bridge is half of four diode bridge rectifiers, and two half bridges can be used to form a bridge rectifier circuit. One half bridge can also be used to form a full-wave rectifier circuit with a center-tapped transformer. Select a rectifier bridge to consider. Rectifier circuit and operating voltage.

Bridge Rectifier,Original Bridge Rectifier,Full Bridge Rectifier ,Diodes Bridge Rectifier,Single Phase Rectifier Bridge, Three Phase Bridge Rectifier

YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnfudatech.com