Hongkong Onice Limited , https://www.osbvapepen.com
Old energy saving lamp internal structure
LED ceiling lamp internal structure <br> Step 1: Remove the lampshade
Teach you how to replace the ordinary ceiling lamp into an LED ceiling lamp
Nowadays, many places are old-fashioned ordinary ceiling lamps. Old-fashioned ceiling lamps are generally energy-saving lamps. This so-called energy-saving lamps are not energy-saving at all, and the most energy-saving LEDs are now, if you want to save The electric or old-fashioned ceiling lamp is broken. How do you replace the old-fashioned ceiling lamp that is not energy-saving with the LED ceiling lamp? Please look below.
Some can be rotated and can be down, and some are stuck with three buckles.
Step 2: Remove the lamp
Pull the plug on the rectifier out of the tube, then pry the circlip of the fixed tube and remove the tube.
Step 3: Remove the rectifier
The rectifiers of fluorescent tubes are typically screwed to the ceiling lamp chassis and connected to the wires on the ceiling. Unscrew the screw and remove the rectifier.
Step 4: Install the ceiling light LED light source
The LED ceiling light comes from a magnet with a magnet directly attached to the base. The wires on the ceiling are connected and the lampshade is covered. Your home is replaced with a small LED light.