Type Wttc (Wind Turbine Tray Cable) 600V Power and Control Tray Cable Direct Burial

September 22, 2023

Model NO.: Type TC Tray Cable, VNTC Tray Cable, TC-ER Rated
Material Shape: Flat Wire, Round Wire
Range of Application: Building Wire
Certification: ISO9001, UL, CCC, RoHS
Brand: Renda
Products Name: Power and Control Cable
UL Listed Type: Type Tc, Tc-Er Rated
Standard: UL66, UL1277, UL83
Rated Voltage: Low Voltage 600V, 2000V
Inner Conductor: Xhhw-2 Conductor, or Thhn Conductor
Sheath: PVC, Sun Resistance, Oil Resistance
Working Temperture: Max 90 Degree in Wet or Dry Locations
RoHS: Yes
Core Indefinite: Icea S-58-679 Method 1, Table 2
Non-Halogen: Non-Halogen Available
Trademark: RENDA
Transport Package: Roll, Reel, Coil as Your Requirements
Specification: 18AWG, 16AWG, 14AWG, 10AWG, 8AWG, 6AWG, 4AWG, 2AWG
Origin: China
HS Code: 8544492100
Model NO.: Type TC Tray Cable, VNTC Tray Cable, TC-ER Rated
Material Shape: Flat Wire, Round Wire
Range of Application: Building Wire
Certification: ISO9001, UL, CCC, RoHS
Brand: Renda
Products Name: Power and Control Cable
UL Listed Type: Type Tc, Tc-Er Rated
Standard: UL66, UL1277, UL83
Rated Voltage: Low Voltage 600V, 2000V
Inner Conductor: Xhhw-2 Conductor, or Thhn Conductor
Sheath: PVC, Sun Resistance, Oil Resistance
Working Temperture: Max 90 Degree in Wet or Dry Locations
RoHS: Yes
Core Indefinite: Icea S-58-679 Method 1, Table 2
Non-Halogen: Non-Halogen Available
Trademark: RENDA
Transport Package: Roll, Reel, Coil as Your Requirements
Specification: 18AWG, 16AWG, 14AWG, 10AWG, 8AWG, 6AWG, 4AWG, 2AWG
Origin: China
HS Code: 8544492100
Type Wttc (Wind Turbine Tray Cable) 600V Power and Control Tray Cable Direct Burial

Type WTTC (Wind Turbine Tray Cable)
600V Power and Control Tray Cable Direct Burial
 Type Wttc (Wind Turbine Tray Cable) 600V Power and Control Tray Cable Direct Burial

APPLICATION
Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired. Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire. Type TC is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1  control circuits. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations.
 
Power Tray Cable Applications
  • Signal, control, power, lighting, or communication
  • Installation in raceways, direct burial, or outdoors (sunlight resistant)
  • Suitable for wet or dry locations, and in the presence of oil and most chemicals in accordance with NEC
  • Acceptable for use in Class 1, Division 2 hazardous locations


STANDARDS & REFERENCES
Type TC Control Cable meets or exceeds the applicable requirements of the following standards and
specifications:
• ASTM - (All applicable standards)
• UL 1277 Electrical Power and Control Tray Cables
• UL 83 Thermoplastic-insulate wire
• UL 44 Thermoset-insulated Wire
• UL 66 Fixture Wire
• NFPA 70 (NEC)
• UL 1581 Electrical Wires, Cables and Flexible Cords
• ICEA S-58-679 - Control Cable Conductor Identification Method 1, Table 2
• Extended Run (ER) Rated
• RoHS Compliant

CONSTRUCTION
Conductor:  Stranded Tinned Copper,Bare Copper
Insulation:
1.Cross-linked polyethylene(XLPE) insulation with property of heat.Moistrure and abrasion resistance and flame retardant.Type XHHW-2 conductors.
2.polyvinyl chloride (PVC) insulation over which a nylon (polyamide).Type THHN conductors.
3.Size 18AWG 16AWGpolyvinyl chloride (PVC) insulation over which a nylon (polyamide). Type TFFN conductors.
Sheath:
1.sunlight resistant gray polyvinyl chloride (PVC).
2.flame retardant, moisture and sunlight resistant CPE jacket.
3.Non-halogen jacket available upon request.

Type TC Power Cable is manufactured using Type XHHW-2 conductors. Individual conductors are bare annealed copper covered with a flame retardant cross-linked polyethylene (XLP) insulation. Flame retardant wax paper fillers are added for roundness and a string binder is applied over the core assembly. The overall jacket consists of a flame retardant, moisture and sunlight resistant CPE jacket. PVC and Non-halogen jackets available upon request.

Type TC Control Cable is available in sizes 16 AWG through 10 AWG, with multiconductor constructions of two through 37 conductors. The product uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG and Type TFFN conductors is size 16 AWG. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a heat, moisture and sunlight resistant PVC. Non-halogen jacket available upon request.

14AWG
Type Number of Conductors /size PVC insulated Jacket Thickness Overall Diameter Approximate Weight
n * AWG mm mm mm kg/km
TC-THHN 2 * 14AWG 0.38 1.14 8.5 102
TC-THHN 3 * 14AWG 0.38 1.14 9.0 130
TC-THHN 4 * 14AWG 0.38 1.14 9.7 161
TC-THHN 5 * 14AWG 0.38 1.14 10.5 193
TC-THHN 6 * 14AWG 0.38 1.14 11.3 226
TC-THHN 7 * 14AWG 0.38 1.14 11.3 249
TC-THHN 9 * 14AWG 0.38 1.52 14.9 360
TC-THHN 10 * 14AWG 0.38 1.52 14.9 382
TC-THHN 12 * 14AWG 0.38 1.52 15.4 435
TC-THHN 15 * 14AWG 0.38 1.52 16.9 530
TC-THHN 16 * 14AWG 0.38 1.52 16.9 553
TC-THHN 19 * 14AWG 0.38 1.52 17.7 636
TC-THHN 20 * 14AWG 0.38 1.52 18.7 677
TC-THHN 25 * 14AWG 0.38 1.52 20.6 829
TC-THHN 30 * 14AWG 0.38 2.03 22.7 1020
TC-THHN 37 * 14AWG 0.38 2.03 24.4 1219
12AWG
Type Number of Conductors/size PVC insulated Jacket Thickness Overall Diameter Approximate Weight
n * AWG mm mm mm kg/km
TC-THHN 2 * 12AWG 0.38 1.14 9.5 136
TC-THHN 3 * 12AWG 0.38 1.14 10.0 176
TC-THHN 4 * 12AWG 0.38 1.14 10.8 220
TC-THHN 5 * 12AWG 0.38 1.14 11.8 267
TC-THHN 6 * 12AWG 0.38 1.52 13.5 337
TC-THHN 7 * 12AWG 0.38 1.52 13.5 371
TC-THHN 9 * 12AWG 0.38 1.52 16.8 497
TC-THHN 10 * 12AWG 0.38 1.52 16.8 530
TC-THHN 12 * 12AWG 0.38 1.52 17.3 607
TC-THHN 15 * 12AWG 0.38 1.52 19.2 744
TC-THHN 16 * 12AWG 0.38 1.52 19.2 778
TC-THHN 19 * 12AWG 0.38 1.52 20.1 900
TC-THHN 20 * 12AWG 0.38 2.03 22.2 1010
TC-THHN 25 * 12AWG 0.38 2.03 1.0mm Female Pin Header

1.0mm (.039") Female Headers

Overview

Whenever there is a need for fitting small-sized connectors in compact devices, the 1.0mm pitch female header, or sometimes referred to as header connector, is ideally suited for this application. Not only does this female header space-savvy, but it is also designed for vacuum pick and place that makes it suitable for high volume automated manufacturing.
Antenk offers these low profile, easy-install, SMT or THM miniature female connector plugs at high quality and affordable China-quoted price, for board-to-board connection, snuggly fitting the pins of a male header and acting as a receptacle.
Assembly and service is simple with either vertical (straight), elevated or at a right angle configuration/orientation, which can dissipate current of about 1.0 A or less in a tape and reel packaging. The filleted corners can also remove shadowing allowing optimization of LED output.
Also, the 1.0mm pitch female headers are made to work in Arduino boards, Arduino Pro and Arduino Mega with either single or double-row female headers, facilitating connections for programming and incorporation into other circuits. They have the perfect height for clearing the USB-B connector and great for stacking multiple shields.
Female header always called as [Header connector", Antenk provide widely range of header connector, from 2.54mm (.100″ inch) pitch to 1.0mm (.039″ inch) pitch. The number of pins (contacts) is from 2 to 40 pins per orw. There are three type: Straight (Dip Vertical), Right angle, SMT (surface mount).
If you can not find the items you interest from above items, welcome to contact us, and you will always get fully responsive from us.

Applications of 1.0mm Pitch Female Headers
Its small size is most suitable for PCB connections of small equipment and devices such as:
Arduino Boards
Architectural and sign lighting
Retail and display lighting
Fluorescent LED retrofit lighting
Cabinet or furniture lighting
Commercial / residential cove lighting
WiFi equipment
Gaming consoles,
Measurement instruments
Medical Diagnostic and Monitoring equipment
Communications: Telecoms and Datacoms
Industrial and Automotive Control and Test

Mount Type: Through-hole vs Surface Mount

At one side of this female header is a series of pins which can either be mounted and soldered directly onto the surface of the PCB (SMT) or placed into drilled holes on the PCB (THM).


Through-Hole (Poke-In)
Best used for high-reliability products that require stronger connections between layers.
Aerospace and military products are most likely to require this type of mounting as these products experience extreme accelerations, collisions, or high temperatures.
Useful in test and prototyping applications that sometimes require manual adjustments and replacements.
1.0mm vertical single row female header, 1.0mm vertical dual row female header, 1.0mm Elevated single row female header, 1.0mm Elevated dual row female Header, 1.0mm right-angle single row female header and 1.0mm right-angle dual row female header are some examples of Antenk products with through-hole mount type.

Surface-Mount
The most common electronic hardware requirements are SMT.
Essential in PCB design and manufacturing, having improved the quality and performance of PCBs overall.
Cost of processing and handling is reduced.
SMT components can be mounted on both side of the board.
Ability to fit a high number of small components on a PCB has allowed for much denser, higher performing, and smaller PCBs.
1.0mm Right-angle Dual Row female header, 1.0mm SMT Single row female header, 1.0mm SMT Dual row female header and 1.0mm Elevated Dual Row female Header are Antenk`s SMT female headers.

Soldering Temperature for 1.0mm Pitch Female Headers

Soldering SMT female connectors can be done at a maximum peak temperature of 260°C for maximum 60 seconds.


Orientation/Pin-Type: Vertical (Straight) and Right-Angle
1.0mm pitch female headers may be further classified into pin orientation as well, such as vertical or straight male header or right-angle female header.

Vertical or Straight Female Header Orientation
One side of the series of pins is connected to PCB board in which the pins can be at a right-angle to the PCB surface (usually called "straight" or [vertical") or.

Right-Angle Female Header Orientation
Parallel to the board's surface (referred to as "right-angle" pins).
Each of these pin-types have different applications that fit with their specific configuration.


PCB Connector Stacking
Profile Above PCB
This type of configuration is the most common way of connecting board-to-board by a connector. First, the stacking height is calculated from one board to another and measured from the printed circuit board face to its highest insulator point above the PCB.

Elevated Sockets/Female Headers
Elevated Sockets aka Stacked sockets/receptacles or Mezzanine are simply stacked female headers providing an exact distance requirement between PCBs that optimizes electrical reliability and performance between PCB boards.

Choosing this type of stacking configuration promotes the following benefits:
Connector Isolation - the contacts are shrouded preventing cable connection mishaps and good guidance for the mating header connectors.
For off-the-shelf wireless PCB module, stacking height is optimized with elevated sockets.
Offers superior strength and rigidity.
Polarisation prevents users from inverted insertion.


Single, Dual or Multiple Number of Rows
For a 1.0mm straight or vertical female header, the standard number of rows that Antenk offers ranges from 1 to 2 rows. However, customization can be available if 3 ,4 or n number of rows is needed by the customer. Also, the number of contacts for the single row is about 2-40 pins while for dual row, the number contacts may vary from 2-80 pins.

Pin Material
The pins of the connector attached to the board have been designed with copper alloy. With customer`s demand the pins can be made gold plated.

Custom 1.0mm Pitch Female Headers
Customizable 1.0 mm pitch female headers are also available, making your manufacturing process way faster as the pins are already inserted in the headers, insulator height is made at the right size and the accurate pin length you require is followed.
Parts are made using semi-automated manufacturing processes that ensure both precision and delicacy in handling the headers before packaging on tape and reel.

Tape and Reel Packaging for SMT Components
Antenk's SMT headers are offered with customizable mating pin lengths, in which each series has multiple number of of circuits, summing up to a thousand individual part number combinations per connector series.
The tape and reel carrier strip ensures that the headers are packaged within accurately sized cavities for its height, width and depth, securing the headers from the environment and maintaining consistent position during transportation.
Antenk also offer a range of custom Tape and reel carrier strip packaging cavities.

Pcb Header,1.0Mm Female Pin Header,1.0Mm Female Header Connector,1.0Mm Pcb Header,0.039" Female Headers,0.039" Pin Header, 1.0mm Female Pin Header SMT, 1.0mm Female Pin Header THT

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com