Self-use HP ENVY M7 Haitao Ben has been for a long time (more than 2 years), indicating that the quality of the official turn is still guaranteed. Opened during the cleaning fan dust. If you are interested, you can also look at my boxing stickers at the time.

Suddenly I felt that I should change a cpu thermal grease. Don't ask me why I suddenly remembered it. I went to cool a cold, my scorching little hand.

After repeated comparisons between Taobao and Jingdong, they decided to enter the ARCTIC MX-4. Today, just about what the thermal grease has on the temperature. Attach the Jingdong purchase address.

In fact, it is a photo of the front and back, nothing.

M7's dismantling process is still relatively smooth, but there are also areas that need attention.

The first is the fast diy pinch, you can see, this side can be very convenient to replace the memory, hard drive, and there is a spare hard drive, is considering a solid state hard drive to try, until the next broadcast.

The extremely deep hidden screw was found for a long time when it was first removed, and it was also found in the left footrest.

Another screw hidden under the hard disk, all evil.

All 2*3 small one-piece screws have this mark, which is very practical.

The hard disk seems to be sorry if you do not hide the screws.

Hidden screw for disc position.

The whole picture of the motherboard. The material is still very real, big brands.

Side close-up.

This is the case where I simply hang off the silicone residue on the cpu.

This is the effect after wiping clean.

Here I am sorry to everyone, too forgetful of smear silicone, and forget to take pictures after wiping.

At the same time, 2g of silicone grease was used at about 30%.

Of course, this time the replacement of thermal grease is also to reduce the cpu temperature and to better fight the Year of the Rooster.

The test results before the replacement of grease were first used. The software used was aida64.

First test the indicators explained.

This is the normal standby temperature before the replacement. It can be seen that the motherboard temperature and the core temperature of the CPU are all around 70 degrees, which is actually very hot. Hard disk 31 degrees.

Replace the former cpu branch budget results, the word is relatively small Kazakhstan, 40,872 points.

Replaced the previous cpu integer arithmetic graphics scores, 13409 points.

Replaced the previous cpu hash scores, 3264MB/s.

Replace the cpu floating point score before 4065 points.

This comparison is of comparative significance. Before replacing the thermal grease, I spent a half hour watching the Pioneer's temperature test. It can be seen that the motherboard temperature is 85 degrees, cpu core temperature is also around 77 degrees.

When this is the case, this is the standby temperature after replacing the thermal grease. It is obvious that the temperature drops. The core temperature of the motherboard and the CPU has dropped from about 70 degrees to about 53 degrees. Don't be so obvious.

By the way, I did a performance test and found that there was little change in running scores. It seems that I was still too young to think that the cpu is not so hot. There will be some improvement in running scores. First cpu queen results, basically the same, 40,782 points (previously 40,872 points).

Others do not have the sun, basically the same, the floating point of change in the floating point score, 4063 points (previously 4065 points).

The key figure reappeared, and it took half an hour to watch the temperature after the vanguard. It can be seen that the temperature of the motherboard is 77 degrees, and the core temperature of the CPU is about 65 degrees, which is also significantly lower than the original problem (85 degrees, 77 degrees).

Through personally dismantling the notebook and replacing the thermal grease, it was found that the core temperature of the motherboard and the CPU had dropped by more than 10 degrees, and it was necessary to say that it was still immediate.

Because there is still no opportunity to compare the differences with other brands, but personally feel that Arctic mx-4 thermal grease is worth starting.

In addition, the most important thing is to remind you that it is really necessary to replace cpu thermal grease regularly. Not only reduces the temperature protection love machine, but also reduces the power consumption Oh, save Oh.

Adaptor Wire harness

Problems with failing factory relays, connectors/terminals and fuse contacts are also common when excessive load is placed on them.

Yacenter has experienced QC to check the products in each process, from developing samples to bulk, to make sure the best quality of goods. Timely communication with customers is so important during our cooperation.

If you can't find the exact product you need in the pictures,please don't go away.Just contact me freely or send your sample and drawing to us.We will reply you as soon as possible.

Plate Harness,Pcb Board Harness,Pcb Board Wiring Harness,Pcb Plate Harness

Dongguan YAC Electric Co,. LTD. , https://www.yacentercn.com