Cixi Zhongyi Electronics Factory , https://www.zybreadboard.com
The current standard for LED street lights is generally:
1. The conversion rate of light is 17%, (1000W per square meter of solar energy, the actual utilization efficiency is 170W)
2. At present, the street lamp lens material is an improved optical material with a transmittance of ≥93% and a temperature resistance of -38-+90 degrees.
3.LED street light lens, mainly used for LED street light lens, the spot is rectangular, the material is PMMA optical material, the transmittance is ≥93%, the temperature is -38-+90 degree, the anti-UV ultraviolet light yellowing rate is 30,000 hours. Change, etc.
4. The average illuminance of the uniformity of road surface illumination is 0.48. Spot ratio 1:2
5. Meet the road illumination. (The actual 1/2 center spot reaches 25 LUX, the 1/4 center light intensity reaches 15 LUX, the lowest light intensity of 4 lux at 16 meters, and the overlapping light intensity is about 6 LUX.
6. It has very good application prospects in new urban lighting. Dimming of depth, and the color and other characteristics do not change due to dimming.
7. Adapt to humidity: ≤95%
8. Quality Assurance: 2 years
The development of LED street lights is fast, but the standard of led street lights is relatively lagging behind. Globally, LED street lights are not standard, and European standards like LED street lights are now available. In fact, the standards for LED street lamps in different regions are not the same in terms of indicators. The LED street lamps we have made must meet the requirements of the sales area in the standard. Therefore, the bidding LED street lamp project should thoroughly study the local LED street lamp standards. Will it be in the fissile market competition? 
High-power LED street light technical indicators
LED lighting technology is becoming more and more mature, and the efficacy of high-power LED light source has reached 80lm/W or more, which makes energy-saving renovation of urban street lighting possible. LED street lights, especially high-power LED street lights, are hitting traditional street lights at a rapid speed. The city's often high-power LED street lights, as the name implies, are street lights with a power of more than 30 watts and new LED semiconductor light sources. At present, the standard of LED street lamps is generally an average illumination of 0.48 for uniformity of road surface illumination. The spot ratio is 1:2, which is in line with road illumination. (The actual 1/2 center spot reaches 25 LUX, the 1/4 center light intensity reaches 15 LUX, the minimum light intensity of 4 lux at 16 meters is 4 LUX, and the overlapping light intensity is 6 LUX. Currently, the street lamp lens material is an improved optical material, and the transmittance is ≥93%. Temperature-resistant -38-+90 degrees, anti-UV UV `yellow 30,000 hours without change. It has very good application prospects in new urban lighting. Dimming for depth, and color and other characteristics will not It changes due to dimming. Solar LED street light refers to LED street light that uses solar silicon plate as power supply.