Multi Conductor Terminal Blocks
The space-saving design and most optimized wiring are two major characteristics of JST Spring-cage Connection Terminal Blocks.The front Wiring method saves the space between two trunking.
Connect conductors that are vibration resistant,gas-tight,and have long-term stability-with the spring-loaded conductor contacting.Two potentials can be routed in parallel through a terminal point in the double function shaft,Accessories can be used to test and identify.
Supplying wiring cross section: 1.5mm²,2.5mm²,4mm²,6mm²,10mm²and16mm².
Multi Spring Terminal Block,4 Conductor Terminal Blocks,Spring Levels Terminal Blocks,Twin Terminal Blocks Wonke Electric CO.,Ltd. , https://www.wkdq-electric.com
Sitting upright: the display screen sits on the platform. This method is the easiest to implement, and this type of installation should be preferred when conditions permit.
Mosaic: The display is embedded in a wall frame. This method is rare. If the wall is not deep enough, it must be considered for maintainability.
Side-mounted: that is, the sides of the display screen are stressed, and the side is hung between the two buildings or columns. This method is often used for the screen suspension of the open space, and the two columns are built according to the suspension requirements of the screen.
LED display installation method
Wall-mounted: The back of the screen is displayed against the wall and fixed to the wall. This method is a common method and is easier to implement.