The skuager, a brand that basically fades out of the sights of friends in the field of mechanical keyboards. The appearance of Filco, which used to be cost-effective and high-fidelity, was highly sought after by many people. I vaguely remember that when I bought the first mechanical keyboard, I had been tangled with skeptics of Skua or Cold Master Flame Guns, and finally I chose to add money to a cool, extreme-cooled car, but the cost-effectiveness of the entry-level skeptics still left me. Impression. Someone asked me: Did you not choose ikbc and Gauss? There was no IKBC or Gaussian yet. Unconsciously a few years later, I also changed from a small white to a player who now has more than a dozen mechanical keyboard players, and I am still full of fanatical love for mechanical keyboards, and I will continue to pursue even better ones. keyboard. . (Value Friends: A lot of Balabala is over.) Well, no emotion, the skeptics of the second generation are not yet listed, so today I was fortunate enough to get the second generation of the skua prototype prototype - 87 key black red axis, the first time here and the value of friends to share. This time, the skeptics are dying or regaining new life? Let us wait and see. table of Contents: Introduction 1. Unpacking & Packaging 2. Appearance & Workmanship 3. Details & Materials 4. Lighting Modes & Lighting Effects 5. Dismantling & Hardware 6. Use & Comparison 7. Summary & Suggestions —————————————————————————————————————————————————————————————————————— Introduction: This skeptical second generation is the latest generation of skeptical gull mechanical keyboards, using Kay's latest S-class shaft body, the traditional green and black tea red four axes and the more popular optical axis recently. The most attractive highlight of the latest second-generation skua mechanical keyboard is the Kailh 2.0 solution, which uses the hot plug technology, the so-called hot-swappable, using Kaihua hot-swappable shaft seat, can support the replacement of a variety of brand stickers The film axis facilitates keyboard enthusiasts to change axes and mix axes, reducing the troubles of post-maintenance. As for how quality has yet to be tested, we can think of how the generation has declined. If you can't change the quality and quality control of the product itself, no more gimmicks will be futile. First, unpacking & packing Packaging still uses the popular corrugated paper box in China. I do not know whether the official version will add a simple keyboard information, I got a trial version of the box there is nothing, is a carton. This is an 87-key keyboard. How could it be so long? When I opened it, it turned out to be mystery. A data line is placed on the left side and a shaft puller is placed on the right side. I thought it was 104 keys. Basically, there are no accessories, in the official version should bring some such as dust cover, color accessories and other accessories. Second, appearance & workmanship The second generation of skuager, this abrasive tool, the same permanent model for thousands of years, has no love at all. Although this set of male models is more popular nowadays, as the latest second-generation keyboard, if it can be better under the appearance, it is not just to imitate others. Ikbc, Gauss, LI, Skua, and Filco are unclear. The skeptics second generation demo version is a standard 87 distribution layout. On the other hand, this male model is indeed good, the classic appearance of the narrow border design, simple and elegant, but unfortunately been bad, every entry is the mold. The back is simple and clear, three-way alignment, four non-slip feet on the back, humanized two-step legs, with anti-slip strips, the stability of the keyboard is still good, and, this second-generation keyboard reserved for key line separation The location is convenient for DIY players. This is the only accessory: shaft puller. The use is to pull and pull! Is this pulling or dialing? stupidly can not tell Third, details & materials The shell of the keyboard is made of hard plastic. Although it is frosted, it still feels like inferior plastic. The keycaps are OEM-height and can fit most DIY keycaps. The material of the keycap is two-color transparent ABS, the font is finer, and it can penetrate white light, and it is still more literary. However, the common problems of wear and oil in the latter part of ABS are still quite a headache. Only this trial version of the keycap quality and workmanship, people dare not flatter. It is said that the official version is to be equipped with PBT translucent keycaps, and it is hoped that the quality of the official version of the keycaps can be improved. The keyboard data cable comes standard with gold-plated USB ports and shielded rings. The material of the data line is an ordinary plastic that people dare not flatter. It is not to weave the data line. It feels like it will turn white, and it is not heat-resistant or afraid of fire. We hope it can be improved in the official version. There are two indicators on the front of the keyboard. They are the caps lock indicator and the scroll lock indicator. After the light is red, there is personality, but it is particularly dazzling if you look at the front. This skeptical second-generation mechanical keyboard equipped with Kaihua S-class red axis, large key and space bar for the satellite axis, tuning is quite good, gentle and not flesh, feel good. The overall feel of the keyboard is very similar to the red axis of IKbc's C104 in my hands. It seems that everyone's boasting Kyocera's red and cherry red shafts have a contending strength. It is worth mentioning that the combination function keys of the second generation of skeptics are quite rich, and there are corresponding functions through FN+F1~F12, which is very convenient for daily use. Fourth, light patterns & lighting effects Black with white light, or feel good, but obviously a white light, according to the keycap why it is blue? It may be because of the reason of the keycap material (favorable reason, haha). Because it is still a trial period, so skeptics did not provide the second generation of drivers, so the lights and functions are relatively single, can not set the button function. The basic lighting of this keyboard is relatively rich, with four levels of brightness, three combinations of lighting and 10 kinds of lighting effects. Four light levels. The three commonly used key combinations light up. The following equivalents do not know the name, so I’m free to play. One type: Collision Two style: wave Three styles: Stars Four types: Rain Five type: single point spread around Six types: single point horizontal diffusion Seven Types: Single point explosion diffusion Eight types: single off lights Nine type: breathing light Ten Type: Single Light V. Dismantling & Hardware The overall feeling is quite regular. This is the hot-swappable shaft seat previously mentioned. The shaft can be easily removed through the shaft puller, and the hot-swappable patch shaft can be replaced at will. It is worth mentioning that Cherry shaft is not supported here. , feeling instant no love. Through this figure you can see the inside circuit board is also red. Circuit board work is also neat. The skeptics of the skeptics and Kaihua's LOGO are still eye-catching. Six, use & contrast Here I compare the parameters of the Kay Red and Cherry Red axes and the actual machine. Parameter comparison: Through the comparison of the two shafts, it can be seen that the trigger pressure of the K. Wah red shaft is greater than the trigger pressure of the cherry MX's red shaft and the bottom pressure is greater. When the Kelvin red shaft is in use, it theoretically feels that the keys are slightly heavier than the cherry MX red axis. Machine comparison: I have used the red axis of the pirate ship K70, the red axis of the Logitech G610, and the red axis of the C104 of the IKBC. Because everyone's preferences are different and the touch is metaphysics, the analysis is limited to communication. I feel good and represent you. Let's start with the comparison below. Compared to the pirate ship K70, the pirate ship outperforms the second generation of skua from appearance, workmanship, material and lighting. On the touch, the skeptic's feel is similar to that of the ikbc's red shaft, so I feel slightly better than the pirate ship. I wrote an evaluation about the pirate ship. I can take a look at it. The skua's feel is smoother and his voice is steady. The sound of the red axis of the pirate ship is crisper than the skua, perhaps because of the keycap material. When playing CSGO, I felt that this second-generation red axis of the skeptic was not so magical. The game feels slightly worse than the cherry red axis. The rebound is not rapid, and the feel of the buttons is slightly sticky. There is a kind of drag and drop feeling. 7. Summary & Suggestions advantage: Disadvantages: to sum up: Finally, on a few pictures End is over. Finally, with the help of this article, I wish all our friends a happy New Year, good health and all the best. I wish Zhang Aunt a new year of new weather and high popularity. I wish all the staff of the platform family happiness, all things along! Copper-Clad Aluminum Core Wire,Copper Clad Aluminum Metal Wire,Copper Clad Aluminum Pure Copper Wire ,Copper Clad Aluminum Bimetallic Wire changzhou yuzisenhan electronic co.,ltd , https://www.ccs-yzsh.com
Compared to IKBC, it is just too much. Sound, material, feel, extremely similar. And the appearance of the second generation of skeptics is exactly the same as IKBC's C87. Specific information about IKBC can refer to my previous article.
Compared with the Logitech G610, the G610 outperforms the skua in terms of appearance, workmanship, and materials. Skua has more lighting effects than the G610. Feel the touch of the red axis of the Logitech G610. The sound is mixed and loud.
1. You can still see the skeptics working on this second-generation mechanical keyboard, multi-function combination keys, hot-swappable axle seats, including the same permanent mold for years.
2. With the Kaihua S red shaft daily use feel close to the cherry red shaft, smooth, comfortable buttons.
3. I am quite satisfied with the lights. Various lights and combinations of lights, it looks very cool.
1. The quality is still so-so, not a masterpiece. It is estimated that this is the reason for trialing the machine, but still hopes to improve the quality.
2. The keycaps are generally touchy, and the workmanship can't be tolerated. The garbage is messy. Basically, every keycap is incomplete.
3. Keyboard material feels bad.
4. The sound of the shaft spring is obvious, and it's particularly annoying to hear more.
5. The material of the keyboard data line is too low to be forgiven!
6. No accessories. Looking forward to the official version of the accessories.
Suggest:
1. We hope that the skua in the official version can strengthen the quality of supervision, improve product quality control. At the very least, make a second generation that is quality-satisfying for most people.
2. We hope that the second generation of Zebras will focus on the appearance of the product while improving quality. Even if you have a little change, you can say that you are responsible for the user and you can see the intention of the product.
3. I hope to increase the use of keyboard materials. Not seeing does not mean that you can not worry.
4. We hope that the official version will be replaced by PBT two-color light keycap.
If the official version and the current product is almost the same, then I can only say, skua, you pull it down, drift away with the wind.