A new generation of air purifiers—washed air purifiers, upgraded purification methods, upgraded health experiences, more efficient handling of formaldehyde, dust, and harmful gases, utilizing the advantages of water filtration and multi-layer filter filtration protection Make the air more fresh and clean.

The water-washing air purifier adopts an advanced air turbocharged convection system to suck indoor contaminated air into the air purifier through fan movement. When the wind passes through, several thousand micro vortices are generated on the surface, and the top flush is used to adsorb the air. The above dirt forms a sludge-like precipitate and enters the next purification process. The contact time between air and water increases and the contact area becomes larger, so that harmful substances are fully dissolved in water, which greatly improves the purification ability. At the same time, due to the high-speed flow of water, a large number of aqueous negative ions and net ion masses are generated, water-soluble pollutants are eliminated, and suspended solids are combined with water to precipitate, settle and water. The nano silver filter releases nano silver ions into the water and kills pathogenic virus spores in water. The purification process is finally completed and strong fresh and safe air is released.

The water-washing air purifier uses water as a medium and can clean the air without adding other materials; it does not need to continuously replace the filter screen to increase consumption; it does not produce secondary pollution after use, and is in line with the concept of environmental protection.

Fiber Optic Pigtails

The pigtail refers to an optical fiber or optical cable with an optical fiber connector installed at one end and an optical fiber or optical cable at the other end. Divide an optical jumper into two to become two optical pigtails. Optical pigtails are usually used for the end of the optical path (such as the actual test result box of the terminal point pair, the splice tray in the wiring equipment, etc.). Or the extraction of optical devices (such as optical splitters, lasers, detectors, etc.). The pigtail length is usually no more than 2 meters.
Same as the optical jumper, when the connecting wire is an optical cable (mostly indoor optical cable), it is called an optical fiber pigtail, and when the connecting wire is an optical fiber (usually a tight-buffered optical fiber), it is called an optical fiber pigtail. There is no special product standard for optical pigtails. Most buyers and sellers switch to "arbitrary type" in the form of optical patch cords when they deliver. The quality acceptance is the same as optical patch cords, which also apply optical fiber movable connector standards.
Pigtails are divided into multi-mode pigtails and single-mode pigtails. The multimode pigtail is orange, the wavelength is 850nm, the transmission distance is 5Km, and it is used for short-distance interconnection. The single-mode pigtail is yellow, with two wavelengths, 1310nm and 1550nm, and transmission distances of 10km and 40km, respectively.
Fiber is an important component of the optical communication system, which is mainly used to realize the two functions of the interconnection of the optical ports between the devices and the interconnection of the device and the fiber core of the optical cable. Different from conventional cables, the pigtail core wire has the characteristics of easy breakage and weak tensile performance, and there is no mature on-site processing plan for the interface components, and it is impossible to make a pigtail with a suitable length on site according to the actual distance. Therefore, in practical applications, the pigtails are usually factory-processed and manufactured according to a certain nominal length series. When installing and constructing on site, engineers can choose pigtails that are longer than the actual distance. Because pigtails have the characteristics of discretization and easy damage, pigtail reeling is the core link in the installation, return and storage of pigtails.
The inner core of the pigtail uses silica glass filaments to carry the optical path. The body is fragile and easy to break. The main line is usually a 48-core ADSS optical cable. These pigtails need to be sheathed in a corrugated tube and placed in the floor compartment or cable sandwich. There is no effective tool assistance in the traditional pigtail threading method, and the operation and maintenance personnel adopt the traditional brute force method to pass the pigtail through the corrugated tube, which causes more fiber jumper damage and high probability of service interruption.

Different Connector Pigtail, Connecter Color-coded Pigtail, Connecter Bunch Pigtail, FC Waterproof Pigtail, Ribbon Fanout Pigtail

Shenzhen GL-COM Technology CO.,LTD. , https://www.szglcom.com