The LED display with transparent display effect, we usually call it LED transparent screen or LED glass screen. The products of this process are precipitated by the technical process in 2016 and 2017, and the application is run-in, the product itself and the application solution are also It has become increasingly mature and stable. 2018 will be a year of explosive growth in this product. I will give you a brief introduction to this product today, and share some of the front-end manufacturing processes by the way. It is also a manufacturing process that can bring better display effect and better stability to the product. It is convenient for everyone to purchase this product in the future, and there are also a few in the product grade. The LED transparent screen is similar to the LED glass screen. As the name implies, it is the product of LED displays for the pursuit of better penetration, reduction or modification of materials. Most of these screens are used in places where glass is installed, so it is also known as a transparent screen. The LED transparent screen retains the advantages of easy control, low-voltage DC drive, rich color performance and long service life of the traditional LED display. It is widely used in urban lighting projects and large-screen display systems due to its unique advantages in glass curtain wall applications. At the same time, it can be used as an indoor display curtain wall, which is widely used in large square lighting, stage sets, bars, high-end dance halls, urban landmark buildings, municipal buildings, airports, automobile 4S shops, hotels, banks, brand chains, etc. It has LEDs. The glass display not only has the practicality of the display, but also has certain aesthetics and concealment. There are two kinds of manufacturing processes for transparent screens. One is surface-side illumination. The process of this process is relatively simple, but the illumination angle is affected by the position of the lamp bead. The angle is smaller, and the imaging effect is small. Will be affected by some. The other is the side-mounted positive illuminating, which is relatively high on the placement process, and the manufacturer who masters the splicing process is relatively less. The picture below is a picture with a side light. Although the difficulty is large, the actual effect is indeed much better than the previous one. I still have to sell it here. The picture above is the latest side-spot positive-spot patch process. When you have the opportunity to actually touch the product, you can try it. The patch lamp bead is difficult to buckle off. This is obvious for the stability of the product. . How to achieve it? I won’t focus on it here. This is the previous generation, the old side is a positive lighting process, and if the patch light beads are strong, it can still be deducted. Therefore, there is still a certain gap between the stability and the latest generation of patch technology. Of course, the two are only different in terms of stability, and the display effect is the same. We provide quick-turn injection molding by many types of materials, like ABS, PA66, PBT, TPU, TPE, PVC, PE, NYLON 6, PC, silicone, TPE, EPDM, PUR, etc. Special for some plastic parts. Our advantages in internal prototyping, bridge tooling and short-run manufacturing, which can eliminate the costly and time-consuming for customers a lot.
ETOP experienced to support one-stop cable assembly solution service, including wire harness, palstic enclosure, silicone, metal, PCBA, etc.
Injection Molding Parts,Plastic Injection Molding,Low Cost Plastic Injection Molding,Plastic Mold Injection Molding ETOP WIREHARNESS LIMITED , https://www.wireharnessetop.com
