LED characteristics

Probe current voltage pin 420*4450 head diameter 5.0 over current current and voltage pin
GW MB10F 0.8A 1000V rectifier bridge
High-power led lamp beads 1W white light Sanan 30mil high power LED lamp beads imitation lumens
Photocoupler

The light emitted by the LED is different from the natural light. The spectrum is not continuous and lacks the infrared part. Therefore, unlike incandescent lamps, the heat generated by the LED is not radiated by radiation, but must be dissipated by conduction. This is also called LED. The reason for the light source. LEDs have the following advantages:

● High-efficiency energy-saving white LED is the most energy-saving white light source device currently known. It only takes a few kWh in a thousand hours (the ordinary 60W incandescent lamp consumes 1 kWh for 17 hours, and the ordinary 10W energy-saving lamp consumes 1 kWh for 100 hours)

●Long-life semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not easy to break, the service life can reach more than 50,000 hours (the life of ordinary incandescent lamps is only hundreds of hours, the service life of ordinary energy-saving lamps is only eight thousand hour)

●Green environmental protection does not contain harmful elements such as mercury and antimony, which is good for recycling and utilization, and does not cause electromagnetic interference (the ordinary lamp contains elements such as mercury and lead. The electronic ballast in the energy-saving lamp will generate electromagnetic interference, and the lamp tube Mercury is still present in the body)

●Protect visual DC drive, no stroboscopic (normal lights are AC drive, it will inevitably produce stroboscopic)

●The light efficiency is high, and 90% of the electric energy is converted into visible light (80% of ordinary incandescent light is converted into heat, and only 20% of electric energy is converted into light energy)

● Market potential: large and low voltage, DC power supply, battery, solar power supply, can be used in remote mountain areas and outdoor lighting, such as lack of electricity, less electricity.

Self-curing Tape

Self-curing tape has excellent mechanical properties. Provide insulation and waterproof for overhead line bare wires and cables. Also used for bus bar insulation, communication base station insulation and cable terminations repair.

Features:

1. Flame retardant material.

2.Excellent waterproof and insulation properties.

3.UV resistance.

4.Anti-aging and flexible.

5.Service temperature: -40°℃ to 90℃

6.Standard color: Black.

We are the professional manufacturer of Electrical Tapes,Insulating Tape and Overhead Line Insulation Sleeve. in China for more than 25 years,if you want to know more information about our company and products, please visit our website.

Together with other Electrical Tapes,Special Adhesiveand and Insulating Tape,HB525W become our best-selling products.The product is supplied as rolls of specified dimensions .Recommend to store in the original packing, protected from moisture, dust, heat and sunlight.



Self-Curing Tape,Self Fusing Electrical Tape,Scotch Silicone Tape,Self Fusing Insulation Tape

CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com