Step method for adding an FPGA terminal

Before you can create an application using an FPGA target, you must create a LabVIEW project. Then add the FPGA target to the project and create the FPGA VI.
Add the FPGA target to the project by one of the following steps:
Add an FPGA terminal to the local computer for development
Add an FPGA terminal to the Real-TIme system
Add an FPGA terminal to a remote computer
After creating a project with an FPGA target, you can perform the following tasks:
Create an FPGA VI
Add FPGA I/O
Add FPGA clock
Add FPGA register entries
Add an FPGA memory item
Add FPGA FIFOs
The FPGA VI functionality varies with the specific FPGA target. For details, see the hardware documentation for the specific FPGA terminal for a description of the FPGA terminal functions.
Add an FPGA terminal to the local computer for development
Follow the steps below to add an FPGA terminal to the Project Explorer window on a computer that is installed locally for development.
1. Create a new project or open an existing project.
2. Right-click on My Computer in the Project Explorer window and select NewÂ»Terminal and Device from the shortcut menu to open the Add Terminal and Device dialog.
3. Select an existing terminal or device to display the FPGA terminal installed on the computer used for development.
Tip If there is no FPGA terminal, you can select a new terminal or device to display the type of FPGA terminal supported on the computer used for development. The above terminal can be added to the project to replace the actual terminal.
4. Expand the FPGA terminal folder. LabVIEW displays support for FPGA targets installed on the local computer and terminals installed on the local computer.
5. Select an FPGA terminal from the list of available terminals.
6. Click the OK button. The FPGA terminal is located under My Computer in the Project Explorer window.
It is currently possible to add an FPGA VI and develop an FPGA VI under the FPGA target.
Add an FPGA terminal to the Real-TIme system
Follow the steps below to add the FPGA terminal in the RT system to the Project Explorer window under the RT controller. Some FPGA targets cannot be used under the RT controller.
1. Create a project and RT terminal using the Real-TIme New Project Wizard.
2. Right-click the RT target in the Project Explorer window and select NewÂ»Terminal and Device Display Add Terminal and Device Dialog from the shortcut menu.
3. Select an existing terminal or device to display the FPGA terminal installed on the computer used for development.
Note: It may be necessary to set the access rights of the RT controller to display the existing FPGA target in the Add Terminal and Device dialog box.
4. Select an FPGA terminal from the list of available terminals.
5. Click OK. The FPGA terminal is located under the RT terminal of the project browser window.
It is currently possible to add an FPGA VI and develop an FPGA VI under the FPGA target.
Add an FPGA terminal to a remote computer
After MAX displays the remote FPGA target, it sets the access rights for the remote system it is on. Users can add a terminal to the Project Explorer window of LabVIEW and run the developed VI on that terminal. Follow the steps below to add the remote system and its FPGA target to the LabVIEW Project Explorer window.
1. Right-click on the project root directory in the Project Explorer window and select NewÂ»Terminal and Device Display Add Terminal and Device Dialog from the shortcut menu.
2. Select a new terminal or device and select Networked Computers/Devices from the list, then click OK. The remote system will be displayed in the project browser window.
3. Right-click on the networked computer/device in the Project Explorer window and select Properties from the shortcut menu to display the Networked Computer/Device Properties dialog box.
4. Assign an IP address to the newly added remote computer in the Address text box.
5. Click the OK button.
6. Right-click on the newly added remote system and select NewÂ»Terminal and Device from the shortcut menu.
7. Select an existing terminal or device to display the FPGA terminal installed on the computer used for development.
Tip If there is no FPGA terminal, you can select a new terminal or device to display the type of FPGA terminal supported on the computer used for development. The above terminal can be added to the project to replace the actual terminal.
8. Click the OK button. An FPGA terminal will appear in the Project Explorer window.
It is currently possible to add an FPGA VI and develop an FPGA VI under the FPGA target.

Stainless Steel Electronic Cigarette Tube
ShenZhen Haofa Metal Precision Parts Technology Co., Ltd. , https://www.haofametal.com